HELMET FITMENT GUIDE

         1. GET YOUR HEAD MEASURED
Play Movie Clip Click Here
                          

First have your head size measured before you try any helmet on. Measure around the fullest part of your head just above the ears, taking the measurement at the forehead. The measurement will correspond to a particular size in the model range you are interested in. This is a good starting point! If you want a particular brand or model, do not be tempted to go for another size if yours is out of stock - wait and get the correct size!
_______________________________________________________________________

         2. TRY IT ON

Play Movie Clip Click Here 
 

Once you have your size, place the helmet firmly onto your head. Secure the chin strap so that you can fit two fingers between it and your jaw. If the helmet has a quick release buckle take time to adjust the strap. Once fitted, you should be able to feel the inside of the helmet against all parts of your head, without feeling 'pressure points' or it leaving red marks. Once you are happy wear the helmet for a few minutes to make sure it is comfortable.

_______________________________________________________________________

         3. TOO TIGHT - TOO LOOSE?

Play Movie Clip Click Here 

With the strap secured, try rotating the helmet from side to side. With a full face model, your cheeks should follow the movement of the helmet and stay in contact with the cheek-pads. Make sure the helmet does not rotate on your head. The cheek-pads should provide a firm, comfortable fit. Next tilt the helmet forward and back. It should stay in position and not move. If it slips forward or back it is unlikely to be the correct size.

_______________________________________________________________________

         4. DOES IT COME OFF?

Play Movie Clip Click Here 

Finally, check that the helmet wont easily come off in an accident. Tilt your head forward and have someone try to roll your helmet off your head by carefully applying an upward force to the rear of the helmet at its base. If you can roll if off in the showroom (with the chinstrap done up) it will be sure to come off in an accident! Ensure your new helmet comes with either an acceptable EC or BS approval marking and that the seller provides sufficient instructions for the use and care of the helmet. Read the instruction booklet to make sure you know how best to look after your helmet.