Loading Please Wait
Shark VZ60 & VZ65 Visors - Light Tint
Light Tint - Anti Fog
Different visor types explained
The visor is supplied without any alterations or upgrades from its original state. No pins, posts or antifog treatment, just a standard plain visor.
Pinlock readyThe visor is fitted with Pinlock pins installed on each side of the visor, this makes the visor ready to accept the Pinlock anti fog insert if required. These antifog inserts can be purchased separately. A visor with the pins can be used with or without the antifog insert, ideal if you may want to fit the insert at a later date.
With Pinlock Insert
The Pinlock pins are installed in the visor and you can select the Pinlock antifog insert to go with it. The Pinlock insert is sold at a reduced price if purchased at the same time as the visor.
Tear off strips can be fitted onto the outside of this type of visor's posts. (Available Separately) When visibility becomes poor due to rain or dirt the tear off can be pulled away, exposing the next clear tear off. The quick release of the tear off makes effect vision enhancement during racing and riding in poor conditions. Ideal for track or race use.
A visor supplied with a anti-fog treatment on the inside to help reduce misting. These visors have to be treated with care as the coating is less durable then the visor.
Pinlock System InformationPinlock Fog Resistant Visor inserts ensure you have a clear view whatever the weather conditions. The system is also interchangeable making it easy to switch visor inserts when the weather changes. Pinlock can be used all year round during hot and humid conditions and wet, cold periods and makes riding with a completely closed visor entirely possible without any visor misting
The Pinlock system is based on three basic principles:
- Moisture absorbing material — Unlike the visor, the Pinlock insert is made out of a soft, porous plastic.
- Material thickness — Because thicker material absorbs more moisture and offers more impact protection.
- Double lens system — The air-tight pocket in between the Pinlock insert and the face shield creates an extra insulation layer further increasing the anti-fogging properties of the total system. Fogging up is a thing of the past!
Pinlock inserts are created out of a moisture absorbing plastic. The silicone seal on the insert creates an airtight pocket between the visor and insert. The Pinlock insert is placed between two adjustable eccentric pins, making it easy to install or switch inserts as weather conditions change.
The Pinlock is a very flexible system, allowing you to switch the colour of your insert adjusting to changing weather conditions. You can click one insert out and put the next one in.
Will fit the following Shark Helmet models;
- S600 (NEW)
Loading Please Wait